A Platter By Powderpost

A Platter By Powderpost

Messaggioda Powderpost » lun 05 lug, 2010 12:03

Immagine
Avatar utente
Powderpost
 
Messaggi: 196
Iscritto il: mer 23 giu, 2010 14:19
Località: Australia

Re: A Platter By Powderpost

Messaggioda Powderpost » lun 05 lug, 2010 12:06

This is my first attempt at posting a photo, please be patient with me. The platter is 350mm diameter and 35mm deep. It is made from Australian silky oak, some times known as lace wood. Other timbers are red cedar and silver ash. The lines are silver ash.
Jim
Avatar utente
Powderpost
 
Messaggi: 196
Iscritto il: mer 23 giu, 2010 14:19
Località: Australia

Re: A Platter By Powderpost

Messaggioda NonnoTony48 » lun 05 lug, 2010 12:24

Powderpost ha scritto:This is my first attempt at posting a photo, please be patient with me. The platter is 350mm diameter and 35mm deep. It is made from Australian silky oak, some times known as lace wood. Other timbers are red cedar and silver ash. The lines are silver ash.
Jim


Jim Dice- Questa e la prima volta che posto qui, Per favore abiate pazienza con me= La Platter e di 350mm x 35mm, Il legno e Australian Silky oak
Cedro e Silver Ash. Le striscine sono Silver Ash.
Jim.
Ultima modifica di NonnoTony48 il lun 05 lug, 2010 12:25, modificato 1 volta in totale.
Vivi Ogni Giorno Come Fosse L'Ultimo====Un Giorno Lo sarà
Avatar utente
NonnoTony48
 
Messaggi: 2791
Iscritto il: mer 28 apr, 2010 08:48
Località: Australia

Re: A Platter By Powderpost

Messaggioda NonnoTony48 » lun 05 lug, 2010 12:28

Hello Jim What a nice surprise,Looks like you've managed another Masterpiece.Congratulation.
Cheers Tony. ;-)

PS I took the opportunity to translate your post.

Ciao Jim Che bella sorpresa.Complimenti per la realizazione di un'Altra Opera.
Cheers Antonio. ;-)
Ultima modifica di NonnoTony48 il lun 05 lug, 2010 12:33, modificato 1 volta in totale.
Vivi Ogni Giorno Come Fosse L'Ultimo====Un Giorno Lo sarà
Avatar utente
NonnoTony48
 
Messaggi: 2791
Iscritto il: mer 28 apr, 2010 08:48
Località: Australia

Re: A Platter By Powderpost

Messaggioda AlbertoA » lun 05 lug, 2010 14:23

Thanks for posting Jim! Wonderful! Very very nice piece of work.
Very nice layout and "crispy" details! Also the choice of wood combination... Very inspiring, if only I had the patience (and skill)
Alberto

Grazie per aver postato Jim, un pezzo meraviglioso.
Molto bello il progetto ed i dettagli molto vivi, come la scelta della combinazione dei legno. Sarebbe molto di ispirazione, se solo avessi la pazienza (e le capacità)

Antonio... google translator avrebbe fatto un lavoro migliore :P :rotfl:
Ciao,
Alberto
Avatar utente
AlbertoA
Staff
 
Messaggi: 15257
Iscritto il: mer 14 apr, 2010 08:40
Località: Firenze

Re: A Platter By Powderpost

Messaggioda Cecco » lun 05 lug, 2010 15:47

Many thanks for posting Jim.
Fantastic job.
Thanks to Tony for help with language. :wink:


Forse però sarebbe meglio postare in "tornitura" :roll:
Avatar utente
Cecco
 
Messaggi: 9146
Iscritto il: ven 30 apr, 2010 18:02
Località: Canino (VT)

Re: A Platter By Powderpost

Messaggioda AlbertoA » lun 05 lug, 2010 15:56

Ma come... non c'era :mricy: ?
Ciao,
Alberto
Avatar utente
AlbertoA
Staff
 
Messaggi: 15257
Iscritto il: mer 14 apr, 2010 08:40
Località: Firenze

Re: A Platter By Powderpost

Messaggioda Alessandro Erpi » lun 05 lug, 2010 21:11

AlbertoA ha scritto:Thanks for posting Jim! Wonderful! Very very nice piece of work.
Very nice layout and "crispy" details! Also the choice of wood combination... Very inspiring, if only I had the patience (and skill)
Alberto

Grazie per aver postato Jim, un pezzo meraviglioso.
Molto bello il progetto ed i dettagli molto vivi, come la scelta della combinazione dei legno. Sarebbe molto di ispirazione, se solo avessi la pazienza (e le capacità)

Antonio... google translator avrebbe fatto un lavoro migliore :P :rotfl:


Antonio.....google traslator would do a better tanslation!!

Ecco,io l'avevo detto.....non lo far tradurre, Jim !!!!!
I asked to you Jim,don't permit Antonio to traslate!!!!

Thanks a lot,
I see another masterpiece!!!
As Alberto write......
Jim,can you send us some datails about your work??

Grazie molte,
vedo un'altro capolavoro!!
Come scrive Alberto......
Jim,ci puoi far vedere qualche dettaglio del tuo lavoro?
:shock: ALESSANDRO :shock:
Avatar utente
Alessandro Erpi
 
Messaggi: 1130
Iscritto il: mer 28 apr, 2010 19:24
Località: Albinia

Re: A Platter By Powderpost

Messaggioda NonnoTony48 » lun 05 lug, 2010 22:53

AlbertoA ha scritto:

Antonio... google translator avrebbe fatto un lavoro migliore :P :rotfl:


Albertoooooo e Alessa----Alessandroooooo :mad: :mad: :mad: :mad:
Cheers Antonio, :twisted:
Vivi Ogni Giorno Come Fosse L'Ultimo====Un Giorno Lo sarà
Avatar utente
NonnoTony48
 
Messaggi: 2791
Iscritto il: mer 28 apr, 2010 08:48
Località: Australia

Re: A Platter By Powderpost

Messaggioda blackbombay » lun 05 lug, 2010 22:55

Bell is bell,but the romb incomplete don't like me so much.................. :wink:
Oppur the romb incoplete but more tagliat.
Avatar utente
blackbombay
 
Messaggi: 303
Iscritto il: mar 27 apr, 2010 13:42

Re: A Platter By Powderpost

Messaggioda artista » lun 05 lug, 2010 23:07

8) 8)



p.s: Jim you have now the aesthetic criticism..........by zio Blachbombay very bastard inside................... :mryellow: :mrblue:
--------------------------------------------------------------
:roll: .........Tùpac Amaru II............ :fischietta:
------------------------------------
Massimo
Avatar utente
artista
 
Messaggi: 7149
Iscritto il: mar 27 apr, 2010 17:55
Località: ROANA-- sul "Magico Altopiano dei 7 comuni"

Re: A Platter By Powderpost

Messaggioda Claude » mar 06 lug, 2010 07:11

A me sembra intarsio e non tornitura. Però un lavoro di pazienza lo è di sicuro.
Avatar utente
Claude
 
Messaggi: 212
Iscritto il: dom 02 mag, 2010 18:22
Località: Verona Italy

Re: A Platter By Powderpost

Messaggioda Alessandro Erpi » mar 06 lug, 2010 09:18

NonnoTony48 ha scritto:
AlbertoA ha scritto:

Antonio... google translator avrebbe fatto un lavoro migliore :P :rotfl:


Albertoooooo e Alessa----Alessandroooooo :mad: :mad: :mad: :mad:
Cheers Antonio, :twisted:


Il nostro amico Jim capirà,è uno scherzo!!!!!!! :razz: :razz:

Ok,Jim it's a Joke!!!!! :fischietta: :fischietta:

Cheers,Alessandrooooooo!!!!! :mryellow: :mryellow:
:shock: ALESSANDRO :shock:
Avatar utente
Alessandro Erpi
 
Messaggi: 1130
Iscritto il: mer 28 apr, 2010 19:24
Località: Albinia


Torna a Tornitura

cron